Select the polyester strapping sealer that best suits your application based on the strap you are using and how often you use the sealer. For more PET strap sealer options please contact a sales representative. Parts & Service available

USING A SEALER:
How to use Tensioners (with cutter) and Sealers for Polyester Strapping.

First, Tension your strap:

• Place strap around the item or items to be strapped, bring the two ends together, ensuring an overlap of approximately six inches.
• Squeeze the tensioner handle to open the tool's holding gripper and thread the free end of the strap from the front to the back end of the tool, through the holding gripper, release pressure on the handle.
• Next take the strap coming from the coil, thread it through the cutter and tension wheel, lift handle back & forth until strap reaches desired tension.

• Place seal in front of the tensioner on overlapped, tensioned strapping.
• Open sealer, place on seal, crimp the seal by closing the sealer completely to form a secure seal.

Third, cut the excess strap:

• Simply cut off the excess piece of strap by pushing the tensioner handle in downward motion.
• Twist the tool to the right to remove.
  
  Remember: Strapping is applied using tension, therefore when removing strapping materials use caution, eye protection is recommended.